Optical Drive - HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual

3. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
Reverse this procedure to install a memory module.

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
DVD±RW Double-Layer Drive with LightScribe (includes bezel)
Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer (includes bezel)
DVD-ROM Drive (includes bezel)
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
Battery on page 63).
Switch cover and keyboard on page
Component replacement procedures
Spare part number
536416-001
536417-001
536415-001
64).
69