Creating Data Discs - HP A6110n - Pavilion - 2 GB RAM Getting Started Manual

124
Getting Started
Copying a disc using one disc drive
If you have only one disc drive, Roxio Creator stores an image file of the disc temporarily
on the computer hard disk drive. Use these steps to copy a CD or DVD using one disc
drive:
1 Insert the disc you wish to copy into the disc-burning drive.
2 Open the Roxio Creator program by clicking the Windows Start Button, All
Programs, Roxio, and then click Creator.
3 Click the Copy tab.
4 Click Copy Disc.
5 Click the Copy button.
Roxio Creator creates an image file of the disc. This file is temporarily stored on the
computer hard disk drive.
6 When prompted, insert a writable CD or DVD into the disc-burning drive and
click OK.
When the process is complete, you are prompted to create a disc label. For more
information on creating a disc label, refer to "Making a disc label using LightScribe,"
or "Making a paper disc label."
For more help using Roxio Creator, refer to the Help menu in the program.

Creating data discs

This section provides instructions for burning data files onto a disc. To create a data disc:
1 Insert a writable disc into the disc-burning drive.
2 Open the Roxio Creator program by clicking the Windows Start Button, All
Programs, Roxio, and then click Creator.
3 Click the Data tab.
4 Click Data Disc.
5 Click Add Data, and add files from the computer hard disk drive.
6 When done adding files, click the Burn button.
When the process is complete, you are prompted to create a disc label. For
more information on creating a disc label, refer to "Making a disc label using
LightScribe," or "Making a paper disc label."
For more help using Roxio Creator, refer to the Help menu in the program.