HP A6110n - Pavilion - 2 GB RAM Troubleshooting And Maintenance Manual page 36

32
Troubleshooting and Maintenance Guide
Performing the Post-Recovery Procedure
1 Press the On button to start your computer.
2 At the Welcome to Microsoft Windows screen, follow the onscreen setup instructions,
and then click Start in the last screen to display the Windows desktop.
3 Configure your Internet connection.
4 Turn off your computer, reconnect all devices that were originally connected to your
computer, and restart the computer.
5 Reinstall software that originally came in the box with your computer, and any
additional software you purchased.
Some of the software shipped in the box might already be installed by the
recovery program.
If you installed updates to any software programs, reinstall those as well. You can
typically download these updates from the software manufacturer's Web site.
6 Use Windows Update to get critical updates from Microsoft:
a Click the Windows Start Button, and Control Panel.
b Under Security, click the Check for Updates button.
c Download and install updates now by clicking Install Updates.
7 Restart your computer. (Some updates will not finish installing until you restart.)
8 Next, use HP Update for critical updates from HP.
a Click the Windows Start Button, then All Programs.
b Click the HP folder, and then HP Update.
c Follow the onscreen instruction to download driver and software updates.
9 If you performed a backup before the recovery, copy the data files you saved from the
backup media to your hard disk drive.
10 Ensure your system has current security software running.