Stopping A 1394 Device; Required 1394 Software - HP Compaq NX7400 User Manual

Using a 1394 device

Stopping a 1394 device

Ä
CAUTION: To prevent loss of information or an unresponsive system, stop
a 1394 device before removing it.
To stop a 1394 device:
1. Double-click the Safely Remove Hardware icon in the
notification area, at the far right of the taskbar.
✎
2. Click the 1394 listing.
3. Click Stop.

Required 1394 software

Some 1394 devices may require additional software, usually
included with the device. For more information about
device-specific software, refer to the manufacturer's instructions
included with the device.
2–2
To display the Safely Remove Hardware icon, click the
Show Hidden Icons icon (< or <<) in the notification area.
External Devices