Modem Command Guidelines; Accessing Hyperterminal; Entering A Command - HP Compaq NC2400 Command Manual

Modem Command Guidelines

Accessing HyperTerminal

An easy way to issue commands to the modem is via
HyperTerminal, included with Microsoft Windows operating
systems. To access HyperTerminal:
1. If you are using Windows 98, Windows 2000, or
Windows Me, select Start > Programs > Accessories >
Communications > HyperTerminal.
2. If you are using Windows XP Home or XP Professional,
select Start > All Programs > Accessories >
Communications > HyperTerminal.

Entering a Command

Ä
CAUTION: Only programmers, software engineers, system
administrators, and other advanced users should access or use
modem commands. For help with modem problems, refer to the
Modem and Networking guide on this CD or contact your Compaq
authorized dealer, reseller, or service provider.
Use the following guidelines when issuing modem commands:
■
When using AT commands, start every command line (except
the
characters; otherwise, the modem will not execute the
command.
Modem Command Guidelines (Advanced Users Only)
and commands) with the attention (
A/ +++
) code
AT
1