Replacing The Memory Module - HP Compaq NC2400 User Manual

1

Replacing the memory module

The computer has one memory module compartment, which is located on the bottom of the computer.
The memory capacity of the computer can be upgraded by upgrading the existing memory module in
the memory module slot.
WARNING!
power cord and remove all battery packs before installing a memory module.
CAUTION
beginning any procedure, ensure that you are discharged of static electricity by touching a
grounded metal object.
To replace a memory module:
1. Save your work.
2. Shut down the computer and close the display.
If you are not sure whether the computer is off or in hibernation, turn the computer on by pressing
the power button. Then shut down the computer through the operating system.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery pack from the computer.
7. Loosen the memory module compartment cover screw (1).
ENWW
To reduce the risk of electric shock and damage to the equipment, unplug the
Electrostatic discharge (ESD) can damage electronic components. Before
1