HP 1150NR - Mini - Atom 1.6 GHz Maintenance And Service Manual page 72

Removal and replacement procedures
Ä
CAUTION: Support the display assembly when removing the following screws. Failure to support the display
assembly can result in damage to the display assembly and other computer components.
2. Remove the four Phillips PM2.5×6.0 screws 1 that secure the display assembly to the base enclosure.
3. Lift the display assembly 2 straight up and remove it.
4. If it is necessary to replace the display bezel or any of the display assembly internal components:
a. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge 3 of the display
bezel until the bezel disengages from the display enclosure.
b. Remove the display bezel 4. The display bezel is available using spare part number 576810-001.
4–34 Maintenance and Service Guide