Component Replacement Procedures; Computer Feet - HP 1150NR - Mini - Atom 1.6 GHz Maintenance And Service Manual

Removal and replacement procedures

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 113 screws, in 9 different sizes, that must be removed, replaced, or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, spare part
number 538346-001. There are 4 rubber feet that attach to the base enclosure and battery in the locations shown in
the following illustration.
4–6 Maintenance and Service Guide