HP 4310s - ProBook - Core 2 Duo 2.1 GHz User Manual page 14

Select
Built-In Device Options
Port Options (all are enabled by default)
Set Security Level
Restore Security Defaults
10 Chapter 3 Computer Setup menus
To do this
●
Enable/disable Dual Core CPU (select models only;
enabled by default).
● Enable/Disable Unified Extensible Firmware Interface
(UEFI) boot mode (disabled by default).
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable the embedded WLAN device (enabled by
default).
●
Enable/disable embedded Bluetooth® device radio
(enabled by default).
●
Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
●
Set the wake on LAN state. Options include the
following:
◦
Disabled
◦
Boot to Network (set by default)
◦
Follow Boot Order
●
Enable/disable the optical disc drive (select models only;
enabled by default).
●
Enable/disable the fingerprint device (select models only;
enabled by default).
● Enable/disable the integrated camera (enabled by
default).
●
Enable/disable a modem device (select models only;
enabled by default).
● Enable/disable the microphone (enabled by default).
NOTE: All port options are enabled by default.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
● Enable/disable the ExpressCard slot.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.