Troubleshooting Tips - GE JGB900 - Appliances 30 in. Gas Range Owner's Manual

,0
,0
&,
,0
,0
iiiii{!!!iii_i!iiiiiiiiii)i
iiiiHl! iiiii
m
Before you call for service...
Troubleshooting -tips
Save time and money/. Review the charts on the following
pages first and you may not need to call for service.
Possible Causes
Plug on rm_ge is not completely
inserted in the electrical outlet.
Burner slits on the side of the
burner may be clogged.
What To Do
Make sure elect_-ical I)lu(*-, i s I)lugged,, into a lixe, properl)
grounded outlet.
Topburners do not light •
or do not burn evenly.
(The front right burner is • Remove the burner heads and clean them. Check the
designedto have slightly electrode area for burned-on l()(>d ()r grease. See the
smaller flames between Care and cleaning of the range section.
the 6 and 9 o'clock
positions. This is normaL) hnproper burner assembly. * Make sure the burner parts are installed c(>rrectlv.
See the Care and cleaning of the range section.
Burner flames very hnproper air to gas ratio. • /f range is connected to l.P gas, contact the person
large or yellow
who installed veto" ran,_e or made the conversion.
Surface burners
light
The oven gas shut-off valve • To check the oven gas shut-off valve, remove the
but oven does not may have accidentally been wamiing drawer (see the Care and cleaning of the range
moved during clemfing or section) and look for the gas shut-off lever at the back
moving, of the range.
Leveris
sl_own closed
PULL TOOPEN.
Sealed burner models
5O