Advertisement
Advertisement
Related Manuals for Dyson water filter
Summary of Contents for Dyson water filter
-
Page 2: Table Of Contents
Owner’s Manual Please read this guide carefully before use. Dyson Helpline contact us on Important safety instructions Assembling your DCO7 Using your DCO7 Using the tools Emptying the clear bin Cleaning the lifetime filter Where to look for blockages Warranty and customer care 1 - 866 - 693 - 9766 Page 2... -
Page 3: Assembling Your Dco7
Box contents Wand Hose Stair tool Brush tool Crevice tool Animal turbo tool Supplied with certain models only, or available as an accessory. Floor tool Supplied with certain models only, or available as an accessory. Dyson Helpline contact us on Assembling your DCO7 This machine was inspected and packaged carefully before being... - Page 4 Slide the wand into the top of the machine until it clicks securely into place. You may need to press firmly and should hear a ‘click’ sound. Push the brush and stair tools securely into the storage holes on either side of machine. Fit the crevice tool into the tool clip on the back of the wand.
-
Page 5: Using Your Dco7
Using your DCO7 WARNING • To reduce the risk of electric shock and personal injury, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. - Page 6 Transporting your Dyson To move the machine from room to room, ensure it is upright, with the cord stored on the cord winders and the wand securely in place. Tilt back on the rear wheels and push forward. Carrying your DCO7 Your DCO7 should be lifted by using the carry handle.
-
Page 7: Using The Tools
Using the tools Choosing the right tool The tools allow you to clean surfaces above the floor and to reach hard to clean areas. Ensure the machine is in an upright position before using tools. Brush tool – with soft bristles to dislodge dust and cobwebs. - Page 8 Hose mode Press the wand release button and remove the wand. Fit one of the tools directly on to the end of the hose. Use tools for confined spaces such as car cleaning. FOR YOUR SAFETY • When the hose is fully extended, grasp firmly by the hose, not the tool.
-
Page 9: Emptying The Clear Bin
Emptying the clear bin CAUTION • Disconnect the machine from the electrical outlet before emptying the bin. Failure to do so could result in electric shock or personal injury. To ensure your machine continues to clean effectively, the clear bin must be emptied when the dust reaches the MAX mark. - Page 10 Shroud cleaning (when necessary) To remove any build-up of lint or large dust particles on the shroud: Ensure the clear bin is empty and the clear bin base is open. Press the bin release catch to remove the clear bin. Clean the shroud with a cloth or dry brush to remove the lint and dust.
-
Page 11: Cleaning The Lifetime Filter
Cleaning the lifetime filter CAUTION • Disconnect the machine from the electrical outlet before removing filter. Failure to do so could result in electric shock or personal injury. Lifetime pre-motor filter Rinse at least once every six months in accordance with the instructions opposite. - Page 12 Only the blue foam pad and the yellow cage should be rinsed – not the filter housing. Submerge the filter and cage in cold water and rinse thoroughly. CAUTION • Rinse in cold water only. • Do not use detergent. •...