Led Board - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

LED board

Description
LED board (includes cable and Mylar cover)
Before removing the LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Primary hard drive (see
b. Optical drive (see
drive on page
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
Remove the LED board:
1. Release the ZIF connector to which the LED board cable is connected and disconnect the LED
board cable (1) from the system board.
2. Release the LED board cable (2) from the base enclosure. The LED board cable is attached to
the base enclosure with double-sided tape.
82 Chapter 4 Removal and replacement procedures
Battery on page 46).
Primary hard drive on page
Optical drive on page
67)
Switch cover and keyboard on page
Display assembly on page
Top cover on page 79)
55)
60) or secondary hard drive (see
73)
Spare part number
499209-001
Secondary hard
62)