HP 320 - Notebook PC Maintenance And Service Manual page 123

Select
Port Options
AMT Options (select models only)
Set Security Level
Restore Security Defaults
To do this
NOTE: All port options are enabled by default.
●
Enable/disable the serial port (select models only).
●
Enable/disable the parallel port (select models only).
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port (select models only).
●
Enable/disable the ExpressCard slot (select models only).
●
Enable/disable the eSATA port (select models only).
NOTE: All AMT options are disabled by default.
●
Enable/disable firmware verbosity.
●
Enable/disable AMT setup prompt (Ctrl-P)
●
Enable/disable USB key provisioning support.
●
Enable/disable unconfigure AMT on next boot.
●
Select terminal emulation mode. Options include the
following:
◦
ANSI (default setting)
◦
VT100
●
Enable/disable firmware progress event support.
●
Enable/disable initiate Intel CIRA.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.
Computer Setup in Windows 115