3 Enterprise Virtual Array hardware components
This chapter describes the Enterprise Virtual Array hardware components.
Fibre Channel drive enclosures
The drive enclosure contains the disk drives used for data storage. A storage system includes
multiple drive enclosures. The major components of the enclosure are:
3U enclosure
Dual redundant, active-to-active 2 Gbps FC loops
2.125-Gb, dual loop, 14-drive enclosure
Dual 2 Gbps FC I/O modules (A and B loops)
Copper Fibre Channel cables
Fibre Channel disk drives and drive blanks
Dual redundant power supplies
Dual redundant blowers
Cache batteries
Environmental Monitoring Unit (EMU)
Enclosure layout
The disk drives mount in
from left to right. A drive is referred to by its bay number. Enclosure status indicators are located
in the lower-right, front corner.
enclosure.
Figure 6 FC drive enclosure—front and rear views
1. Drive bay 1
3. EMU
5. Blower 1
7. Blower 2
9. I/O module A
26
Enterprise Virtual Array hardware components
bays
in the front of the enclosure. The bays are numbered sequentially
Figure 6 (page 26)
shows the front and rear views of the FC drive
2. Drive bay 14
4. I/O module B
6. Power supply 1
8. Power supply 2
10. Status indicators (EMU, enclosure power, enclosure
fault)