HP 6100 Software Manual page 56

5. In the Navigation pane, select the array for which you want to update hard disk drive firmware.
The Initialized Storage Systems Properties window opens.
6. Click Code load.
The Code Load Selection window opens.
Figure 17 Code Load Selection window
.
7. Select Code Load Disk Drives On Line and click Select.
The Code Load Disk Drives On Line - Page 1 window opens.
Figure 18 Code Load Disk Drives
.
8. Do one of the following:
a. If you are running HP Command View EVA 9.x or later, click Browse and navigate to the
zip file or manually enter the path to the zip file (from
b. If you are running HP Command View EVA 8.x or earlier, enter the path to the folder where
you extracted the bundled image files (from
56 Upgrading the Enterprise Virtual Array
disk drives
Page 1 window
Step
Step 3.b).
3.a).