HP Ew2400 - JetDirect Print Server Administrator's Manual page 248

Table B.1 HP Jetdirect Classic Control Panel Menu (3 of 3)
Menu Item
CFG LINK=
WEB=
SECURITY=
ENWW
Description
Selects whether you want to manually configure the HP Jetdirect
print server's network link.
NO (default): Bypass the link configuration menu items.
YES: Access the link configuration menu items.
The link speed and communication mode must match the
network. One of the following link configurations can be set:
AUTO (default): The print server will automatically configure itself
to match the network's link speed and communication mode.
If it fails, 100TX Half will be set.
10T HALF: 10Mbps, half-duplex operation
10T FULL: 10 Mbps, full-duplex operation
100TX HALF: 100 Mbps, half-duplex operation
100TX FULL: 100 Mbps, full-duplex operation
For configuration management, specify whether the embedded
Web server will accept communications using HTTPS (Secure
HTTP) only, or both HTTP and HTTPS.
HTTPS: For secure, encrypted communications, only HTTPS
access is accepted. The print server will appear as a secure
site.
HTTP/HTTPS: Access using either HTTP or HTTPS is permitted.
Specify whether the current security settings on the print server
will be saved or reset to factory defaults.
KEEP (default): The current security settings are maintained.
RESET: Security settings are reset to factory defaults.
The HP Jetdirect EIO Control Panel Menu 248