HP Ew2400 - JetDirect Print Server Administrator's Manual page 128

Firmware Upgrade
For print servers that support firmware upgrades, this page allows
you to upgrade the print server with new features.
Note
The firmware upgrade file for the print server must be available on
your system. To identify and retrieve the appropriate upgrade file,
visit HP online support at:
http://www.hp.com/go/webjetadmin_firmware
On that page, do the following:
1. Locate the print server model and the upgrade file.
2. Check the upgrade file version and verify that it is more recent
than the print server's installed version. If it is, then download
the file. If not, then you do not need to upgrade.
To upgrade the print server using the embedded Web server:
1. Enter the path to the upgrade file or click Browse to locate it.
2. Then click Upgrade Firmware.
LPD Queues
The LPD Queues page allows you to specify LPD (line printer
daemon) print queues on the Jetdirect print server. For more
information on LPD printing and print queues, see
"Configuring for LPD
LPD printing must be enabled on the print server before you can
set LPD queues. If LPD is disabled, go to the
enable it.
If LPD printing is enabled, ten different named print queues are
available. Four of these queues are configured automatically and
their parameters cannot be changed. The remaining six queues can
be defined by the user.
The six user-defined queues can be set up with character strings --
such as job control commands -- that are automatically added before
ENWW
HP Jetdirect ew2400 print servers will have limited
upgrade capabilities. A network cable must be used.
A firmware upgrade through a wireless connection
is not supported.
Printing".
Misc. Settings
Using the Embedded Web Server 128
Chapter 5,
tab to