HP Ew2400 - JetDirect Print Server Administrator's Manual page 118

IPX/SPX
The IPX/SPX tab allows you to configure IPX/SPX (Internet
Packet Exchange/Sequenced Packet Exchange) parameters on the
HP Jetdirect print server for operation on a Novell NetWare or
IPX/SPX-compatible network (such as a Microsoft network).
See Table 4.5 for a description of items on this page.
CAUTION
For a Novell NetWare network:
The embedded Web server may be used to select Queue Server
Mode parameters in a Novell Directory Services (NDS)
environment.
You cannot create the NDS print server, printer, and queue
objects using the embedded Web server. To create these objects,
use other available tools or utilities.
Table 4.5 IPX/SPX Settings (1 of 2)
Item
IPX/SPX Enable
IPX/SPX Frame
Type
ENWW
If you are using direct-mode printing over IPX/SPX
on a Microsoft network, do not disable IPX/SPX.
Description
Enables or disables the IPX/SPX protocols on the HP Jetdirect
print server. If the checkbox is empty, IPX/SPX is disabled.
Specify the IPX/SPX frame type to be used by the HP Jetdirect
print server on your network. After a frame type has been
configured, all others will be counted and discarded.
AUTO (default) senses all frame types and configures the first
one detected.
EN_8023 limits the frame type to IPX over IEEE 802.3 frames.
EN_II limits the frame type to IPX over Ethernet frames.
EN_8022 limits the frame type to IPX over IEEE 802.2 with
IEEE 802.3 frames.
EN_SNAP limits the frame type to IPX over SNAP with
IEEE 802.3 frames.
Using the Embedded Web Server 118