Table 2-2 Description Of Front And Back Frus - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Table 2-2
Call- FRU
out # ID
1 N/A
2 32
3 32
4 2
5 62
6 6
7 N/A
8 7
9 1
Removing and Replacing Major Library Components
Exploded Views of Replaceable Parts (FRUs)
Description of Front and Back FRUs
Description
Vacant drive module cover: Uses two 6-32 screws to attach.
Standard power supply (see page 2-59 for more information).
Redundant power supply: Uses 6-32 x .25 T15 screws to attach (see
page 2-61 for more information).
Note: Libraries should only contain all redundant or standard power
supplies. The illustration is for identification purposes only.
• DLT LVDS tape drive module.
• DLT HVDS tape drive module.
• Ultrium LVDS tape drive module.
• Ultrium HVDS tape drive module.
(See page 2-21 for more information on drive replacement.)
• DLT or Ultrium LVDS online drive repair SCSI loop cable (included
in cable kit).
• DLT or Ultrium HVDS online drive repair SCSI loop cable (included
in cable kit).
Slave controller for all models, except Model 2/20 (see page 2-18 for
more information).
Vacant card slot cover.
Remote management card assembly (see page 2-18 for more
information).
• Low Voltage Differential SCSI (LVDS) library controller.
• High Voltage Differential SCSI (HVDS) library controller.
(See page 2-18 for more information on card replacement.)
2-6 Chapter 2