HP 108164-003 - ProLiant - 800 Reference Manual page 131

Microsoft windows event id and snmp traps reference guide for use with smartstart version 8.25
Table of Contents

Advertisement

Log Severity: Warning (2)
Log Message: There were no physical adapters in team: "%1." This error can be caused by
improperly installed drivers. Remove all device instances associated with the team and re-install the
drivers and team.
Event identifier: cpqnimsg.dll - 274 (Hex)0x84350112 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent cannot generate Traps due to a communication problem
with the NIC SNMP extension agent.
Event identifier: cpqnimsg.dll - 275 (Hex)0x44350113 (Service Event)
Log Severity: Information (1)
Log Message: Communication with the NIC SNMP extension agent has been restored. TRAPS can
now be sent.
Event identifier: cpqnimsg.dll - 276 (Hex)0x84350114 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent cannot communicate with the Token Ring Protocol driver
(CNMPROT.SYS).
Event identifier: cpqnimsg.dll - 277 (Hex)0x44350115 (Service Event)
Log Severity: Information (1)
Log Message: The NIC Management Agent version %1 has started.
Event identifier: cpqnimsg.dll - 279 (Hex)0x84350117 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent could not set an event. The data contain the error code.
Event identifier: cpqnimsg.dll - 280 (Hex)0x84350118 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent service could not start any agents successfully.
Event identifier: cpqnimsg.dll - 281 (Hex)0x84350119 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent main thread did not terminate properly. The data contain
the error code.
Event identifier: cpqnimsg.dll - 283 (Hex)0x8435011b (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent did not respond to a request. The data contain the error
code.
Event identifier: cpqnimsg.dll - 285 (Hex)0x8435011d (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent could not get the system type. The data contain the error
code.
Event identifier: cpqnimsg.dll - 287 (Hex)0x8435011f (Service Event)
NIC agents 131

Advertisement

Table of Contents
loading

This manual is also suitable for:

124708-001 - proliant cluster - 1850179740-001 - proliant - 30001850r - proliant - 128 mb ram195294-001 - proliant - ml370r219700-001 - proliant - 1500221050-001 - proliant - 5000r ... Show all

Table of Contents