Table of Contents
Advertisement
Using a USB Device
USB devices function in the system the same as comparable
non-USB devices, with 1 exception: By default, USB devices do
not function unless an operating system that supports USB is
loaded. Windows 2000 Professional, Windows XP Home, and
Windows XP Professional support USB.
To use a USB keyboard or hub connected to a USB connector on
the notebook during startup (before Windows loads) or in a
non-Windows application or utility (such as Computer Setup),
enable USB legacy support.
Enabling USB Legacy Support
USB legacy support is set in Computer Setup. Computer Setup
is a non-Windows utility. For more information about using
Computer Setup, refer on this CD to the Software Guide,
"Setup and Diagnostic Utilities" section.
1. To open Computer Setup, turn on or restart the notebook,
then press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Device
Options.
3. Use the arrow keys to select Enable USB legacy support.
4. To save your preference and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preference is set as you exit Computer Setup and is in effect
when the notebook restarts.
Hardware Guide
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
External Device Connections
F2.
F1.
6–3
Advertisement
Table of Contents
