Connecting Your Home Stereo System (Optional) - HP Pavilion a6330 Getting Started

28
Getting Started (features vary by model)
The following diagram shows a typical 7.1 audio installation.
Color
1 Lime green
2 Black
3 Orange
4 Gray

Connecting your home stereo system (optional)

Most home receivers/amplifiers have RCA-type input connectors. You must connect
Y adapter cables between your computer and your receiver/amplifier. Y adapter cables
have one 3.5 mm (1/8-inch) stereo mini-jack on one end, and two RCA connectors on the
other. These cables are purchased separately.
The number of Y adapter cables that you need to connect to your home stereo system
depends on the number of speakers that you install:
2/2.1 speaker system: One Y adapter cable
4/4.1 speaker system: Two Y adapter cables
6/5.1 speaker system: Three Y adapter cables
8/7.1 speaker system: Four Y adapter cables
Description
Front audio input
Rear audio input
Center/subwoofer audio input
Side audio input (not shown)