HP Compaq Presario,Presario SR5710F Getting Started page 34

24
Getting Started (features vary by model)
3 Connect the rear speaker cable to the black connector that matches the back of
your computer.
3 6
For type 3-connector systems, the blue Audio Line In connector functions as a Rear Line
Out when a multichannel audio configuration is activated.
4 Connect the cables to the audio system.
5 Connect the front and rear speakers to the subwoofer. Refer to the speaker
documentation.
6 Turn on the computer.
NOTE: Always turn on the computer before you turn on the speaker system.
7 Plug in the speaker system power.
8 Turn on the speaker system.
9 After the speakers are connected to the computer, configure the audio software for
sound output for your computer model. See "Configuring Speaker and Sound
Options."
Type 3: See "Configuring speakers with Realtek HD Audio Manager."
Type 6: See "Configuring speakers with Realtek HD Audio Manager."
Type S (audio card): See "Using the Creative Sound Blaster X-Fi or X-Fi Fatality
audio card."
The following diagram shows a typical 4.1 audio installation:
S