To Undock The Omnibook - HP OmniBook 900 User Manual

Using the Dock

To undock the OmniBook

Note
If you have installed the tray security post, make sure that no objects (such as a
phone jack or network connector) are protruding from the OmniBook PC card
slots,.
1-16
1. If there is no ac power connected to the dock, turn on the OmniBook to provide
power for undocking.
The dock will not operate in this power mode.
2. Exit any applications that are using devices that are connected through the
dock (network, USB, and PCMCIA devices.)
3. Press the undock button
– or –
If you are using Windows 95 or Windows 98, click Start, Eject PC.
The amber wait light
4. If you have enabled a docking password, you will be prompted for your
password. You must enter it to undock the OmniBook.
on the dock.
then turns on.
1. Undock button
2. Docked light
3. Wait light
4. Undocked light