HP Compaq NX7000 Reference Manual page 90

Multimedia
Auto Insert Notification settings are selected through the
operating system.
To select Disk-at-once settings:
1.Select Start > All Programs > Roxio Easy CD Creator 5 >
2. Select the Advanced tab.
3. Clear the Disk-at-Once check box.
4. Select the Set as Default button.
To select Track-at-once settings:
1.Select Start > All Programs > Roxio Easy CD Creator 5.
2. The fourth item on the status bar at the lower edge of the
6–12
Applications > CD Copier.
CD Project window indicates whether Track-at-Once or
Disk-at-Once is selected.
If Track-at-Once is displayed on the status bar,
Track-at-Once is already enabled.
If Disk-at-Once is selected, double-click
Disk-at-Once to enable Track-at-Once.
Startup and Reference Guide—Part 2