g. Remove the two T5M2.5×4.0 screws 1 and the
h. Use a 4.0-mm socket to remove the two M2.0×10.0
i.
j.
Disassembling the Hard Drive
Reverse the above procedure to assemble and install the
hard drive.
Maintenance and Service Guide
two PM3.0×3.5 screws 2 that secure the hard drive to the
hard drive frame.
alignment pins 3 that secure the hard drive to the hard
drive frame.
Remove the hard drive from the hard drive frame 4.
Remove the hard drive connector from the hard drive 5.
Removal and Replacement Procedures
5–9