Removal And Replacement Preliminaries; Tools Required - HP Compaq NC8000 Maintenance And Service Manual

Removal and Replacement
This chapter provides essential information for proper and safe
removal and replacement service.

4.1 Tools Required

You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
Torx T5 screwdriver
■
Torx T8 screwdriver
■
4.0-mm socket for hard drive alignment pins
■
Flat-bladed screwdriver
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
Maintenance and Service Guide
Preliminaries
4
4–1