HP Compaq NC6140 Hardware Manual page 86

7. Remove or insert the memory board.
To remove a memory board:
a. Pull away the retention clips on each side of the board 1 .
b. Grasp the edges of the memory board, then gently pull it
c. To protect a removed memory board, place it in an
Removing a memory board
✎
The notebook supports upgrades for PC2100-compliant
128-Megabyte, 256-Megabyte, or 512-Megabyte DDR memory
boards.
Hardware Guide
(The board tilts upward.)
out of the memory slot 2 .
electrostatic-safe container.
Hardware Upgrades
7–7