HP Compaq NC6140 Hardware Manual page 31

Pointing Device and Keyboard
Initiate Standby (Fn+F3)
The
Fn+F3
■
When the notebook is on, press the
Standby. When Standby is initiated, your work is saved in
random access memory (RAM), the screen is cleared, and
power is conserved. While the notebook is in Standby, the
power/standby light blinks.
■
To exit Standby, briefly press the power button.
The function of the
Windows, can be changed. For example, the
set to initiate Hibernation instead of Standby. For more
information about Standby, Hibernation, and changing the
function of the
"Power Management," on this CD.
Switch Display and Image (Fn+F4)
The
Fn+F4
connected to the notebook. For example, if an external monitor
is connected to the notebook, pressing
among the notebook display, the external monitor display, and a
simultaneous display on both the notebook and the external
monitor.
Most external monitors receive video information from the
notebook using the external VGA video standard. The
hotkeys also switch images among devices receiving video
information from the notebook in other ways. The following
video transmission types, with examples of devices that use them,
are supported by the
■
LCD (notebook display)
■
External VGA (most external monitors)
■
S-video (televisions, camcorders, VCRs, and video capture
boards with S-video-in jacks)
2–8
hotkeys are set at the factory to initiate Standby.
Fn+F3
hotkeys, see the Software Guide, Chapter 1,
Fn+F3
hotkeys switch the image among display devices
Fn+F4
Fn+F3
hotkeys, called the "sleep button" in
Fn+F4
hotkeys:
hotkeys to initiate
hotkeys can be
Fn+F3
switches the image
Fn+F4
Hardware Guide