Removal And Replacement Preliminaries; Tools Required - HP Compaq NC4010 Maintenance And Service Manual

Removal and Replacement
This chapter provides essential information for proper and safe
removal and replacement service.

4.1 Tools Required

You will need the following tools to complete the removal and
replacement procedures:
Magnetic screwdriver
Torx T8 screwdriver
Torx T5 screwdriver
Phillips P0 screwdriver
Flat-bladed tool
5.0-mm socket
4.0-mm socket
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
Maintenance and Service Guide
Preliminaries
4
4–1