HP Compaq NC4010 Maintenance And Service Manual page 34

Select
Device Options (continued)
HDD Self Test Options
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions may use NTSC,
PAL, or PAL-M.
Maintenance and Service Guide
Table 2-3
Advanced Menu (Continued)
To Do This
Change the parallel port mode from Enhanced
Parallel Port (EPP, the default setting) to
standard, bidirectional, EPP, or Enhanced
Capabilities Port (ECP).
Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
notebook runs in Battery Optimized mode.)
Specify how the notebook recognizes multiple
identical docking bases that are identically
equipped. Select Disable to recognize the
docking bases as a single port replicator; select
Enable to recognize the docking bases
individually, by serial number.
Enable/disable the reporting of the processor
serial number by the processor to the software.
Run a quick comprehensive self-test on hard
drives in the system that support the test features.
Troubleshooting
2–7