Using The Setup Utility - HP 2000-216 Maintenance And Service Manual

Troubleshooting

Using the Setup Utility

Changing the Language of the Setup Utility
The following procedure explains how to change the language of
the Setup Utility. If the computer is not in the Setup Utility, begin
at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press
to enter setup," is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select System Configuration >
Language, and then press
3. Press
then press
4. When a confirmation prompt with your preference selected
is displayed, press
5. To set your preferences and exit the Setup Utility, press
and then follow the instructions on the screen.
Your preferences go into effect when the computer restarts in
Windows.
Navigating and Selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To choose a menu or a menu item, use the arrow keys.
■
To choose an item in a drop-down list or to toggle a field,
for example an Enable/Disable field, use either the arrow
keys or
■
To select an item, press
■
To close a text box or return to the menu display, press
■
To display additional navigation and selection information
while the Setup Utility is open, press
2–2
or (or use the arrow keys) to select a language, and
f5 f6
to select a language.
enter
enter
or .
f5 f6
while the prompt, "Press <F10>
f10
.
enter
to save your preference.
.
enter
f1
Maintenance and Service Guide
.
f10
.
f1