HP 510 Maintenance And Service Manual page 75

Select
Built-in Device Options
Port Options
ENWW
To Do This
port to the computer or to an optional docking device (select models
only).
● Automatic/disable Intel SpeedStep Technology.
●
Select a parallel port mode: EPP (Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced Capabilities Port).
● Enable/disable BIOS DMA data transfers (select models only)
●
Enable/disable the system fan when connected to an AC outlet.
● Enable/disable Intel or AMD PSAE Execution Disable. When enabled,
the processor can disable some virus code execution, which helps to
improve computer security.
●
Enable/disable LAN Power Save. When enabled, saves power by
turning off the LAN when not in use.
●
Enable/disable SATA Native Support.
●
Enable/disable Dual Core CPU.
●
Enable/disable Secondary Battery Fast Charge.
● Enable/disable embedded WWAN Device Radio.
●
Enable/disable embedded WLAN Device Radio
● Enable/disable embedded Bluetooth® Device Radio.
●
Enable/disable LAN/WLAN Switching. When enabled, switches to a
WLAN when a LAN is either unavailable or disconnected.
● Enable/disable Wake on LAN from Off.
●
Enable/disable the ambient light sensor.
● Enable/disable the serial port.
●
Enable/disable the parallel port.
● Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION Disabling the USB port also disables MultiBay
devices and ExpressCard devices on the advanced port
replicator.
● Enable/disable the 1394 port.
●
Enable/disable the cardbus slot.
● Enable/disable the ExpressCard slot.
●
Enable/disable the infrared port.
Computer Setup menus 69