Computer Setup; Computer Setup Access - HP 510 Maintenance And Service Manual

6

Computer Setup

WARNING!
troubleshooting and repair procedures are detailed to allow repair at only the subassembly or
module level. Because of the complexity of the individual boards and subassemblies, do not
attempt to make repairs at the component level or modifications to any printed wiring board.
Improper repairs can create a safety hazard. Any indication of component replacement or printed
wiring board modification may void any warranty or exchange allowances.

Computer Setup access

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system
is not working or will not load.
NOTE
your computer.
NOTE
navigate and make selections.
NOTE
legacy support is enabled.
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
To access Computer Setup:
1. Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
ENWW
Only authorized technicians trained by HP should repair this equipment. All
Some of the Computer Setup menu items listed in this section may not be supported by
Pointing devices are not supported in Computer Setup. You must use the keyboard to
An external keyboard connected by USB can be used with Computer Setup only if USB
f10 while the
Computer Setup access 65