Advertisement

DTI series
652 / 1004
User manual

Advertisement

Table of Contents
loading

Summary of Contents for THOMSON DTI 1004

  • Page 1 DTI series 652 / 1004 User manual...
  • Page 3 As a general rule, it is preferable to unplug the set from the mains if you are away for a prolonged period. If you smell any suspicious odours or see smoke coming rom the set, unplug the set immediately and have it checked by an approved technician.
  • Page 4 If you use the RF modulator connection, please switch the value to ON in the installation menu (see Menu/Installation/Terminal/Connection) and then switch your TV on the channel 62. Note that if the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed.
  • Page 5: Installation

    General Information 2.2 Installation Standard settings The first start is done automatically in one click : Once the decoder is ON, just choose your menu language, confirm by OK and let the decoder automatically start the installation of channels. Personal settings Pour régler vos préférences personnelles pour votre adaptateur (par exemple format TV, langue, réglages...
  • Page 6 General Information 3.2 Remote Control and behaviour - When the adapter is running, the LED is green; in standby mode the LED is red. Turns the receiver on/off. Mutes/unmutes audio. Numerical buttons (0-9) BACK Controls numerical operations (i.e. Active only in video mode, allows enter a channel number or a PIN code).
  • Page 7 Set the internal antenna to on/off (off). Antenna DTI 1004 only. Channels Install all TV & radio. Parental lock Lock or unlock channels based on maturity information. PIN code Change PIN Code. Erase Channels Show terminal & software reference Information http://www.thomson-europe.com.
  • Page 8: Favourite Lists

    3. Use the colour buttons to assign/unassign channels of the All channels list to one or several Favourite List(s). You can set up to 4 Favourite lists, each defined by a colour (List A uses RED color, B uses GREEN, C uses YELLOW and D uses BLUE).
  • Page 9 • Power on-off: This is a combination of the two previous Timers. • Zap to Channel: Set the Date and Start Time first and setup a channel to zap to. When the time comes, the system will automatically jump to the selected channel.
  • Page 10: Parental Lock

    Audio channels). The availability of subtitle and audio languages is depending of the current broadcasted program. Use the p/q buttons to highlight the option you want to modify, then use the t or u buttons to make a selection (i.e. for audio channel, you may choose between ’Stereo, Left or Right Audio’).
  • Page 11: Main Features

    THOMSON reserves the right to modify the specifications and pictures mentioned in this document at any time and without prior notice. Therefore information contained in this user manual is not contractual. For a full and updated description, see http://www.thomson-broadband.com.
  • Page 12: Troubleshooting

    Annexes 7. Trouble shooting If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Warning: never open your set yourself. Symptoms Cause Solution The green/red lights on front The power cord is not Check that the power cord is plugged panel do not light up.
  • Page 13 Model and serial number DTI series 652 / 1004 THOMSON Sales Europe 46, quai A. Le Gallo 92648 Boulogne Cedex FRANCE 322 019 464 RCS NANTERRE http://www.thomson-europe.com http://www.thomson-broadband.com 36119220 © Copyright THOMSON 2006 Dealer's address...

Table of Contents