Advertisement
Quick Links
Advertisement
Related Manuals for THOMSON ACC912
Summary of Contents for THOMSON ACC912
-
Page 1: Specifications
Accessories ACC912 ACC912 6-Bolts for Wall mounting bracket 6-Wall Ancho Bolt Sleeves 6-Monitor Bracket Bolts 6-Washers Hole Drilling Template Installation and Setup Guide Specifications Wall mounting bracket Width(mm) Installation and Setup Guide Height(mm) Depth(mm) Weight(kg) -
Page 2: Safety Instructions
Safety Instructions - Qualified service technician should install the product properly after reading this manual thoroughly. - Qualified service technician should hand this manual over to the customer after installation and ask him/her to read and keep it. After reading this manual, keep it in the place that the user always can contact easily. - Page 3 It may cause a fire or could give an electric shock. Make sure to unplug before installing this product. Do not install this product barehanded. Otherwise it may cause a fire or could give an electric shock. It may cause injuries.
-
Page 4: Installation
Insert the monitor brackets on the monitor as shown above. Install the 6 bolts securely, in the back of the monitor in the holes provided. Be sure the bracket hooks are at the top side of the monitor. - Page 5 Note: It is advisable to use a bubble level to make sure that the template is horizontally true. - Warning: The surface that the wall mounting bracket is to be mounted on should be of sufficient strength to support the weight of the monitor and speakers typically;...
- Page 6 Washer Bolt for angle adjustment a. Drill the 6 hole positions as shown on page 7. Using an 8mm drill appropriate for the material on the wall, drill each hole to a depth of 80mm – 100mm. b. Clean each drilled hole.
- Page 7 Bolt the monitor wall-mount frame to the wall as shown above using holes 2, 3, 7, 12, 16, and 17.
- Page 8 Carefully lift up the monitor and place it in position on the wall mounting bracket securely as shown by arrow 1. Push the bottom of the monitor toward the wall as shown in arrow 2, so that the monitor will “click” into position onto the wall mounting bracket.