Contents 1 Important safety instructions 6 Troubleshooting Safety 7 Trademarks Care for your product Care of the environment Declaration of conformity Help and support 2 Your Soundbar What’s in the box Soundbar Connectors Remote control Prepare the Remote Control Placement Wall mount 3 Connect Connect to HDMI ARC...
1 Important Risk of electric shock or fire! • Before you make or change any safety connections, make sure that all devices are disconnected from the instructions power outlet. • Never expose the product and accessories to rain or water. Never Read and understand all instructions place liquid containers, such as vases, before you use your product.
Page 4
Risk of injury or damage to this • Do not mix old and new batteries. product! • Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, • For wall mounting, this product must Ni- MH, etc.) batteries. be securely attached to the wall in •...
Help and support that the product is covered by European Directive 2012/19/EU. For extensive online support, visit This symbol means that the product www.philips.com/support to: contains batteries covered by • download the user manual and the European Directive 2013/56/EU which cannot be disposed of with quick start guide normal household waste.
2 Your Soundbar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register TAB5109/10 TAB5109/98 your soundbar at www.philips.com/support. What’s in the box TAB5109/67 TAB5109/61 TAB5109/96 TAB5109/77 Check and identify the items in the •...
Connectors (Bluetooth) button • Press to select the Bluetooth mode. This section includes an overview of the • Long press for 3 seconds to enter connectors available on your soundbar. the Bluetooth pairing mode. • Long press for 8 seconds to disconnect all devices and clear the BT connect history list, then enter pairing mode.
Remote control 4 EQ • Select Equalizer (EQ) effect. This section includes an overview of the • Press and hold for 3 seconds remote control. to turn on/off dialogue enhancement. 5 Treble +/- Adjust treble level. 6 Bass +/- (Subwoofer’s Volume) Adjust subwoofer’s volume.
• Remove the battery from the remote Replace the Remote Control Battery control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire. •...
the drilling holes position on the Wall mount wall. Tighten the wall mount brackets on Note the wall with screws (included) and screwdriver (not included). Make • Improper wall mounting may result in sure that they are securely installed. accident, injury or damage. If you have any query, contact Consumer Care in your Lift the unit onto the wall mount country.
3 Connect Note • Your TV must support the HDMI-CEC and This section helps you connect your ARC function. HDMI-CEC and ARC must soundbar to a TV and other devices, and be set to On. then set it up. • The setting method of HDMI-CEC and ARC may differ depending on the TV.
Use 3.5mm-RCA audio cable • Use a RCA to 3.5mm audio cable to connect the TV’s audio output sockets to the Audio in socket on the soundbar. Audio in Audio out Connect to power • Before connecting the AC power cord, ensure you have completed all other connections.
App download to Standby mode after about 15 minutes if the TV or the external Scan the QR code or search ”Philips soundbar is disconnected (or USB, Entertainment” in the Apple App Store or BT function bit playback pause), or Google Play to download and install the switched off.
Adjust the Volume ◎ ◎ ● Adjust the Soundbar’s Volume ◎ ● ● • Press Vol+/Vol- (Volume) to increase ◎ ● ● ● or decrease a volume level. ◎ ● ● ● ● » When adjusting the volume, the indicator will increase / decrease Select Equalizer (EQ) the amount of light.
(left / right LEDs close to the center) On the Bluetooth device, switch on Bluetooth, search for and select • ON: This mode uses DTS Virtual:X Philips TAB5109 to start connection with virtual height and virtual (see the user manual of the surround processing to realize a...
» The indicator light on the (Ensure the LE Audio function is soundbar will show which mode activated on your LE Audio device), is currently in use. search for and select Philips TAB5109-LEA to start connection. Operate your audio device directly for playback features. Status...
Play audio through USB Factory reset Enjoy audio on a USB storage device, such Reset device to default setting. as an MP3 player and USB flash memory, • Turn on the soundbar, press and hold etc. buttons at the same time for 8 seconds.
5 Product Remote control specifications Distance/Angle 6m/30° Battery type AAA (1.5V X 2) Note Supported audio formats • Specifications and design are subject to change without notice. HDMI ARC LPCM 2ch, LPCM 5.1ch, Dolby Digital, Dolby Digital plus, DTS Digital surround 5.1 Bluetooth Optical LPCM 2ch, LPCM 5.1ch, Dolby...
Page 19
Confirm that the audio request service. If you still have a problem, output setting is set to FIXED or get support at www.philips.com/support. STANDARD, not VARIABLE. Refer to your TV’s user manual for more detailed information.
Page 20
7 Trademarks Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the soundbar, or remove any obstacle between the device and the The Adopted Trademarks HDMI, HDMI soundbar.
Page 22
Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.