14. TECHNICAL DATA...................24 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and • disconnect the mains plug from the mains socket.
ENGLISH 2.4 Use 2.5 Service • To repair the appliance contact an WARNING! Authorised Service Centre. Risk of injury, electrical • Use original spare parts only. shock, fire, burns or damage to the appliance. 2.6 Disposal • Use this appliance in a household only. WARNING! •...
ENGLISH 4.2 Display A) The Temperature area: • : the washing phase : Temperature indicator • : the rinses phase : Cold water indicator • : the spin phase : Time Manager indicator. • : the Extra rinse permanent C) The time area: option.
Page 8
Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 3 kg Synthetic items or mixed fabric items. Normal 1200 rpm soil. Synthetics 60°C - Cold Delicate fabrics as acrylics, viscose, polyest- 3 kg Delicates er items.
Page 9
ENGLISH Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 1 kg Synthetic and mixed fabric items. Light soil and 800 rpm items to freshen up. Quick 30°C 1) Standard programmes for the Energy Label consumption values. According to regu- lation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»...
6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. At programme start the display shows the duration programme for the maximum load capacity.
ENGLISH 7. OPTIONS 7.1 Temperature To drain the water refer to ‘At the end of the programme’. Set this option to change the default temperature. 7.3 Prewash Indicator = cold water. With this option you can add a prewash The display shows the set temperature. phase to a washing programme.
ENGLISH 10. DAILY USE WARNING! Refer to Safety chapters. 10.1 Loading the laundry 1. Open the appliance door 2. Put the laundry in the drum, one item at a time. 3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum.
Page 14
10.4 Liquid or powder detergent • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level.
Page 15
ENGLISH • The indicator starts to flash on 1. Press the display. The indicator flashes. • The programme starts, the door 2. Change the options. locks, the display shows the 3. Press again. indicator The programme continues. • The drain pump can operate for a 10.10 Cancelling a running short time when the appliance fills water.
• You must drain the water to open the CAUTION! door. If the temperature and level of To drain the water: the water in the drum are too high, you cannot open the 1. Press . The appliance drains the door.
ENGLISH • Wash with a special detergent heavy • To help the environment, do not use soil stains. more than the correct quantity of • Be careful with the curtains. Remove detergent. the hooks or put the curtains in a •...
Page 18
12.4 Door seal Always obey the instructions that you find on the packaging of the product. 12.3 Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this: Regularly examine the seal and remove all •...
Page 19
ENGLISH 12.6 Cleaning the inlet hose and the valve filter 12.7 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
ENGLISH 12.8 Emergency drain 0° C, remove the remaining water from the inlet hose and the drain pump. Because of a malfunction, the appliance 1. Disconnect the mains plug from the cannot drain the water. mains socket. If this occurs, do steps (1) through (9) of 2.
Page 22
• - The mains supply is unstable. WARNING! Wait until the mains supply is stable. Deactivate the appliance before you do the checks. 13.2 Possible failures Problem Possible solution The programme does Make sure that the mains plug is connected to the mains not start.
Page 23
ENGLISH Problem Possible solution The spin phase does not Set the spin programme. operate or the washing cycle lasts longer than usually. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again.
Brand logo Name of the distributor Electrolux Lehel Kft 1142 Budapest Erzsébet kir.né útja 87 Model denomination EWS 1276 CEU Measure unit Energy class (on scale from A to D, where A - most effective and D - least effec- tive)
Page 25
ENGLISH Average annual water con- litres 9999 sumption Washing noise on normal 60° dB/A C cotton programme Spinning noise on normal 60° dB/A C cotton programme 1) Complies with EN60456. 15. ENVIRONMENT CONCERNS not dispose appliances marked with the Recycle the materials with the symbol symbol with the household waste.