Table of Contents
Advertisement
Chapter 3
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to
Wi-Fi
>
Wi-Fi
3. Toggle on
WiFi Move
Note:
When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password, Wireless
Security, Wireless Mode, Wireless Radio Status, Wi-Fi Schedules, LED Schedules, Wi-Fi Clone Settings,
MAC Filter Settings, Parental Controls, and Guest Network.
3 4
Wi-Fi Clone
I want to:
Copy wireless settings from my router to my extender, so I can use the same SSID and
password to access the internet in my house.
How can I do that?
1
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the password you set for the extender.
2
Go to
Wi-Fi
>
Wi-Fi
3
Select a Wi-Fi band or both to be cloned. 2.4GHz & 5GHz is selected by default.
4
Before cloning, make sure your router supports the same band as your extender.
If you do not know how to check this, go to your router's User Guide for more
information.
5
Plug your extender near your router.
6
Press the WPS button on your router.
7
Within two minutes, press the
Move.
to enable the feature.
Clone.
Wi-Fi
button on the side panel of the extender.
Configuring via Web Management Interface
16
Advertisement
Table of Contents
