Cautions And Warnings - Health O Meter Professional 349KLX Manual

CAUTIONS AND WARNINGS

To prevent patient/caregiver injury or damage to your scale, please follow the
instructions in this user manual very carefully.
•
Do not exceed the weight capacity specified for this scale.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation according to the
procedure described in this manual.
•
Do not use in the presence of flammable or explosive materials.
•
If the scale becomes damaged, it should not be operated until properly serviced.
•
Do not transport the scale with a patient or object on the scale.
•
Ensure that the AC adapter and scale do not come in contact with liquids, excessive
temperature, or excessive humidity.
Patient/caregiver safety
•
Patient should wear socks or other form of lightweight foot covering during weighing
event.
•
To prevent patient injury, the patient must be attended throughout the entire weighing
event. Caregivers should ensure that the patient is stable and provide support as
needed when getting onto and off of the scale.
When operating the scale with the AC adapter:
•
Operate this scale exclusively with the AC adapter provided by Health o meter
Professional. Use of an unspecified adapter will void the warranty, and can pose a
serious safety hazard.
•
For use with AC adapter model ADPT40 (USA or Canada) or ADPT30 (International)
(not included)
•
Prior to using this scale, inspect the AC adapter cord for cracking / fraying, or for broken
/ bent plug prongs.
•
Prior to using this scale, ensure that the AC adapter is plugged into an outlet with the
rated voltage appropriate for operation.
•
Ensure that the AC adapter outlet is wired to a circuit breaker or other protected power
source.
•
Unplug the AC adapter, and carefully store both the adapter and adapter cord before
moving the scale.
•
Operating this scale at voltages and frequencies other than specified can damage the
equipment and will void the warranty.
When operating the scale with batteries:
•
For accurate weighing, if the "LO" indicator activates, replace the batteries or switch to
the AC adapter as soon as possible.
•
When replacing / inserting batteries, be sure to use all new batteries.
In no event shall Pelstar
or connected with the assembly, use, or misuse of its products.
UM349KLX REV20191007
, LLC be liable for damages or injuries whatsoever arising out of
®
62
Back to Home Page