(h_ng[ng the (h_nne[ of the Sub Pkture
After you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
Press the MENU button.
Press the A or Y button to
select "Picture", then press
the ENTER button.
Press the " or Y button to
...............
select "PIP", then press the
ENTER button.
Press the A or V button to
select "Channel", then press
the ENTER button.
Press the A or Y button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the CHA or CHV
button on the remote control to change
channels of sub picture during PIPon.
• The channels of sub picture are not available when antenna is set to "ANT 2 IN". It links to
"ANT 1 IN".
English - 62