TP-Link Archer C20 Quick Installation Manual

Quick Installation Guide
Wireless Dual-Band Router
Set up with videos:
Scan the QR code or visit
https://www.tp-link.com/support/setup-video/#wi-fi-routers to
search for the setup video of your product.
* Images may differ from actual products.
� If your internet connection comes from an Ethernet outlet,
connect the router's WAN port to it, then follow step 4 and 5.
� If you want to configure this new router to extend your
network, refer to the Access Point Mode and Range
Extender Mode sections on the back page.
Configure the router
Method 1: Via TP-Link Tether App
1. Download the Tether app via Apple Store or Google
Play, or simply scan the QR code below.
or
Scan for Tether
Power adapter
POWER
POWER RESET
Connect the power adapter to
the router and turn on the router.
2. Open the Tether app and log in with your TP-Link ID.
Note: If you don't have an account, please create one first.
Log In
TP-Link ID (Email)
Tether
Password
WAN Router
Wi-Fi
WAN 1 2 3 4
/WPS
Connect the powered-off modem
to the router's WAN port with an
Ethernet cable.
Power On/Off
Forgot Password
Log In
Important
Unplug your modem, and remove
the backup battery if it has one.
Modem
Turn on the modem and then wait
about 2 minutes for it to restart.
Verify that the following LEDs turns solid on.
Note: If the 2.4 GHz LED and 5 GHz
LED are off, press and hold the
Power Internet
2.4GHz 5GHz WPS/Wi-Fi button on the rear panel
On On On On for about 5 seconds, then release the
button. Both LEDs will turn on.
3. Tap the button in the Tether app and select Wireless
Router > Standard Routers. Follow the steps to
complete the setup and connect to the internet.
Note: Due to Tether app
Choose Your Device Type
updates, your actual user
interface and pathway may
differ from those depicted
here.
To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router.