Installation Guide
54 Mbps Wireless USB Print Server with 4-Port Switch WGPS606
These setup instructions assume that you will connect to an access point or
wireless router.
Note:
See the installation instructions for your operating system before attaching
the USB cable to the USB Adapter and your computer.
Estimated Completion Time: 20 minutes for each printer; 10 minutes for each
computer.
NETGEAR
Overview
with 4-port Switch
Remove the NETGEAR CD.
What's on the CD?
•
A setup wizard
•
Software utilities you use for customizing your
print server
•
The installation and reference guides
Note:
Do not connect the Wireless USB Print Server until you are prompted to do
so by the wizard on the CD.
Familiarize Yourself with the Wireless
USB
Print Server.:
•
Notice that the bottom label has information such as:
•
Port and connector descriptions and locations
•
Login defaults
•
Status lights
•
To stand the unit up, attach its feet.
•
Set the antenna vertically for best side-to-side coverage or horizontally for best
top-to-bottom coverage.
Set Up the Print Server First
The Smart Wizard installation assistant opens the print server manager wizard.
b.
Follow the on-screen instructions, and click Next when you are ready to proceed.
c.
Follow the step-by-step instructions to complete setting up the printer with the
wireless USB print server.
Now, Set Up a PC
1.
Use the Smart Wizard to set up a
PC.
a.
Click Set up this PC.
When you finish the installation, your network will resemble this illustration.