Table of Contents
Advertisement
3.12 INDOOR UNIT P.C.B. PROGRAMMING
The device is prepared for possible programming of several operation parameters.
By modifying these parameters as described below, the device can be adapted according to specific needs.
To access the programming phase, press and hold the buttons "
" for more than 5 seconds; the display shows two dashes "--" flashing and
you must enter the password to access the programming menus.
55
To enter the first digit, use the buttons to adjust the DHW "
second digit, use the buttons to adjust the central heating temperature "
".
To confirm the password (
button "
"
56
Once in the menu, you can cyclically scroll the four submenus (P, t, A, S) by
pressing the DHW buttons "
".
57
The first digit of the central indicator (Ref. 19, Fig. 48) shows the family of the
parameter, while the second digit shows its number.
58
) and access the menu, press the operating mode
", to access the menu press the button "
" and "
"; to enter the
95
Advertisement
Table of Contents
