Table of Contents
Advertisement
Split exahust ducts must not pass through walls of flammable material.
Do not place household appliances underneath the appliance as they could be damaged if the safety valve intervenes, if the
drain trap is blocked, or if there are leaks from the hydraulic connections; otherwise, the manufacturer cannot be held respon-
sible for any damage caused to the household appliances.
For the aforementioned reasons, we recommend not placing furnishings, furniture, etc. under the appliance.
In the event of malfunctions, faults or incorrect operation, turn the appliance off and contact an authorised company (e.g. the
Authorised Technical Assistance Centre, which has specifically trained staff and original spare parts).
Do not attempt to modify or repair the appliance alone.
Any modification to the appliance that is not explicitly indicated in this section of the booklet is forbidden.
Installation standards
This appliance can be installed outdoors in a partially protected area.
By partially protected area, we mean one in which the unit is not directly exposed to the elements (rain, snow, hail, etc.).
Installation of gas appliances, flue exhaust pipes and combustion air intake pipes is forbidden
in places with a fire risk (for example: garages, closed parking stalls), and in potentially dan-
gerous places.
Do not install on the vertical projection of hobs (for appliances up to 35 kW).
Do not install in places/rooms that constitute public areas of apartment buildings, internal
stairways or other escape routes (e.g. floor landings, entrance halls, etc.).
These appliances, if not adequately isolated, are not suitable for installation on walls of com-
bustible material.
Installation is also forbidden in places/rooms that constitute public areas of apartment build-
ings such as cellars, entrance halls, attics, lofts, etc., unless otherwise provided for by local
regulations in force.
Installing the wall recessed frame kit must guarantee the indoor unit stable, efficient support.
The recessed frame kit ensures appropriate support only if installed correctly (according to the rules of good practice), following the in-
structions on its instructions leaflet.
For safety reasons against any leaks it is necessary to plaster the housing compartment of the indoor unit in the brick wall.
The recessed frame for the boiler is not a supporting structure and must not replace the wall removed. It is necessary to position the boiler
inside the wall.
9
Advertisement
Table of Contents
