Table of Contents
Advertisement
Menu item
DHW integrat. enabled
Not used on this model.
Enables IU operation in CH mode if the EU is not sufficient to
Heating integrat. enabled
reach the set point.
Waiting time to reach the setting set before activation of the
DHW waiting time
integration in the production of domestic hot water.
Waiting time to reach the setting set before activation of the
Heating waiting time
integration in room heating.
It determines whether the heat generator integration is
Integration mode
activated at a fixed temperature or automatically by means of
the cost-effectiveness calculation.
Establishes the outdoor temperature under which central
Manual activation temp.
heating integration is enabled.
If the flow temperature of the outdoor unit is lower than the
heating-set value minus the activation band divided by 2, then
Integration band
after a period equal to the activation delay time, the indoor unit
will be turned on.
Allows to enter the price of electricity in € per kWh for time slot
F1 Electricity price
1
Allows to enter the price of electricity in € per kWh for time slot
F2 Electricity price
2
Allows to enter the price of electricity in € per kWh for time slot
F3 Electricity price
3
Gas price
Allows to enter the methane price in € per cubic metre (*).
(*) For other gasses, the value to be inserted must be calculated by multiplying the user gas price by the correction factor indicated in the
table below:
Menu item
Working parameters
Status
Maintenance
"Service" -> "Integration" menu
Description
Gas used
Methane
LPG (m
)
3
LPG (L)
"Service" -> "Heat pump" menu
Sub-menu for working data
Sub-menu for operating state
Sub menu for maintenance operations
Range
Default
--
--
Yes / No
Yes
0 - 240 (5 minute
20'
steps)
0 - 240 (5 minute
20'
steps)
AUTO / MAN
MAN
-15 ÷ 35 °C
0 ÷ 15 °C
0 ÷ 2.55 €/kWh
0,23
0 ÷ 2.55 €/kWh
0,23
0 ÷ 2.55 €/kWh
0,23
0 ÷ 2,55 €/m
0,95
3
Correction factor
1
0,38
1,45
Description
Customised
value
0
3
89
Advertisement
Table of Contents
