Programming - Immergas VICTRIX HYBRID Instructions And Recommendations

3.6 P.C.B. PROGRAMMING
By modifying these parameters as described below, the system can be adapted according to specific needs.
Access the "Service" menu by pressing the right "Menu" button and turning the main switch until selecting the desired menu. Press the
main switch to confirm the selection. Insert the relative access code and customise the parameters according to your requirements.
Menu item
Zone definition
System definition
Thermoregulation
Integration
Heat pump
Information
Factory settings
Menu item
Room Control Interface Establishes the temperature control device in use
Enable Heating kit Enables operation of the heater kit
O.U. antifreeze function Indicate the presence of antifreeze fluid in the system
86
"Service" menu
Zone system sub-menu settings
Sub-menu to define the devices connected to the system
Temperature control setting sub-menu
System integration setting sub-menu
Heat pump operating parameters sub-menu
System information sub-menu
Allows to reset all parameters with factory values
"Service" -> "Zone definition" menu
Description
Description
Range
Rem.C. / RT
Yes / No
Level 3 / Level 2
Range
-
-
-
-
-
-
Yes / No
Customised
Default
value
Rem.C.
No
Level 2