1
UNIT INSTALLATION
1.1
DESCRIPTION OF THE PRODUCT.
Victrix Hybrid is a hybrid heat pump consisting of:
- Victrix 24HY indoor unit;
- Audax.DK4 outdoor unit;
- Control panel (supplied in the accessories group of the indoor unit).
Victrix Hybrid 32 is a hybrid heat pump consisting of:
- Victrix 32HY indoor unit;
- Audax.DK4 outdoor unit;
- Control panel (supplied in the accessories group of the indoor unit).
The Victrix Hybrid heat pump was designed only for heating and production of domestic hot water for domestic use and similar purpos-
es.
For its normal operation, the indoor unit must be combined with the Audax.DK4 outdoor unit and the Victrix Hybrid control panel;
therefore, it is necessary to comply with all prescriptions regarding safety and use of the control panel, indoor unit and outdoor unit.
1.2
INDOOR UNIT INSTALLATION RECOMMENDATIONS
Operators who install and service the appliance must wear the personal protective equipment
required by applicable law.
This unit is designed for wall-mounted installation only.
The place of installation of the appliance and relative Immergas accessories must have suitable features (technical and structur-
al), such as to allow for (always in safe, efficient and comfortable conditions):
- installation (according to the provisions of technical legislation and technical regulations);
- maintenance operations (including scheduled, periodic, routine and special maintenance);
- removal (to outdoors in the place for loading and transporting the appliances and components) as well as the eventual re-
placement of those with appliances and/or equivalent components.
The wall surface must be smooth, without any protrusions or recesses enabling access to the rear part. They are not designed to
be installed on plinths or floors (Fig. 1).
OK
1
7