Immergas VICTRIX HYBRID Instructions And Recommendations page 24

It is recommended to contact a qualified company (e.g. the Authorised After-Sales Technical
Assistance Centre) for replacement to avoid a hazard.
The power supply cable must be laid as shown (Fig. 8).
If the network fuse indicated in the wiring diagram (Fig. 53) as component "F1" on the P.C.B. needs to be changed, this operation must
also be performed by qualified personnel using a 3.15A rapid type (F) 250VAC fuse (dimension 5 x 20).
For the general power supply of the indoor unit from the mains, the use of adapters, power strips and extension cables is not permitted.
Make the various electrical connections according to your needs.
Outdoor unit electrical connection.
For the electrical connection of the Audax.DK4 outdoor unit, refer to the related instructions booklet
24