Immergas VICTRIX HYBRID Instructions And Recommendations page 20

Hide thumbs Also See for VICTRIX HYBRID:
Table of Contents

Advertisement

According to the local regulation in force, make sure that a gas cock is installed upstream of each connection between the ap-
pliance and the gas system. This cock, if supplied by the appliance's manufacturer, can be directly connected to the appliance
(i.e. downstream from the pipes connecting the system to the appliance), according to the manufacturer's instructions.
The Immergas connection unit, supplied as an optional kit, also includes the gas cock, whose installation instructions are
provided in the kit.
In any case, make sure the gas cock is connected properly.
The gas supply pipe must be suitably dimensioned according to current regulations in order to guarantee correct gas flow rate to the burn-
er even in conditions of maximum generator output and to guarantee appliance efficiency (technical specifications).
The coupling system must conform to standards in force (EN 1775).
The appliance is designed to operate with fuel gas free from impurities; otherwise it is advisable to fit special filters upstream of
the appliance to restore the purity of the fuel.
Storage tanks (in case of supply from LPG depot).
- New LPG storage tanks may contain residual inert gases (nitrogen) that degrade the mixture delivered to the appliance casing func-
tioning anomalies.
- Due to the composition of the LPG mixture, layering of the mixture components may occur during the period of storage in the tanks.
This can cause a variation in the calorific value of the mixture delivered to the appliance, with subsequent change in its performance.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Victrix hybrid 323.030698

Table of Contents